How to use dust suppressant

Generally, the dust suppressor can be used by manual, mechanical or professional spray station and fixed spray system. The dust suppressor diluent can be evenly sprayed on the material surface or the dust raising area to achieve the effect of dust prevention and reduction. The specific use method and dosage can be adjusted according to the site conditions to achieve the desired effect. Small stock yards can be sprayed with backpack spray devices or medicine trucks.

Large stock yards can be equipped with fixed spraying devices, or vehicle mounted or professional spraying trucks can be used for spraying, with a range of up to 18-200m.

For mobile train and automobile transportation, dust suppression agent spraying base station shall be built or mobile spraying vehicle shall be purchased for operation. Dry fog spraying equipment can be installed on the conveyor belt.

For dust reduction in underground and dust workshops, atomization spray devices for dust reduction can be installed. The device can capture fine dust in the air through high pressure superfine fog, thereby achieving good atomization and dust reduction effect.

It should be noted that improper selection of dust suppressant will corrode the equipment or affect the quality of spray. Dilution of solid dust suppressant:

1. It is recommended to equip a multi-function high mixed liquid mixing system for the new standard spraying base station to solve the problem of powder in water for a long time.

2. Stir while adding water for 3-15 minutes to ensure that the dust suppressant is uniformly dissolved. The mixing time should be slightly longer.

3. Put the dust suppressant into the equipment container containing water in proportion, mix while putting, and use it after mixing evenly.

Dilution of liquid dust suppressant:

Pour the original solution of the dust suppressant directly into the equipment container (there must be some water in the container to avoid sticking to the bottom of the container), and then add the required water at one time. Use the impact of water to dilute and dissolve it before use. 1. Protect the environment and remove dust particles of more than 2.5 microns.

2. No corrosion, no pollution, biodegradable, and no secondary pollution.

3. Resistance to wind erosion and rain erosion.

4. It can effectively reduce and reduce material loss.

5. It can effectively reduce the dust hazard and protect the health of workers and surrounding people. 1. If there is any spillage, it should be cleaned in time. For cement pavement, please use moisturizing dust suppressant.

2. After use, please clean and maintain the equipment in a timely manner. In case of wrong entrance, nose and eyes, please wash the equipment with clean water immediately and consult a doctor in a timely manner.

3. Select the right products and brand services.